Passtcert 300-135 Troubleshooting and Maintaining Cisco IP Networks can not only help customers 100% pass their first time to attend Cisco certification 300-135 exam, but also provide a one-year of free online update service for them, which will delivery the latest tshoot 300-135 dumps to customers at the first time to let them know the latest certification exam information. So Passtcert is a very good website which not only provide good quality tshoot 300-135 dumps, but also a good after-sales service.
If you have decided to upgrade yourself by passing Cisco certification 300-135 exam, then choosing Passtcert is not wrong. Our Passtcert promise you that you can pass your first time to participate in the CCNP certification 300-135 exam and get Cisco 300-135 certification to enhance and change yourself.On Passtcert website you can free download part of the tshoot 300-135 dumps to quiz our reliability.
Share some CCNP 300-135 exam questions and answers below.
How to check MTU of interface using ping? / How can you check the links mtu size with ping command?
A. ping 10.1.1.1 size 1501
B. ping 10.1.1.1 size 1500 df-bit
C. ping 10.1.1.1
D. ping 10.1.1.1 no-size
Answer: B
What is the solution to the fault condition?
A. Under the interface Tunnel34 configuration delete the tunnel mode ipv6 command.
B. Under the interface Serial0/0/0.34 configuration enter the ipv6 address 2026::34:1/122 command.
C. Under the interface Tunnel34 configuration enter the ip address unnumbered Serial0/0/0.34 command.
D. Under the interface Tunnel34 configuration delete the tunnel source Serial0/0/0.34 command and enter the tunnel source 2026::34:1/122 command.
Answer: A
What is the solution of the fault condition?
A. Under the interface Serial0/0/0 configuration enter the ip nat inside command
B. Under the interface Serial0/0/1 configuration enter the ip nat outside command
C. Under the ip access-list standar nat_trafic configuration enter the permit 10.2.0.0 0.0.255.255 command
D. Under the ip access-list standar nat_trafic configuration enter the permit 209.65.200.0 0.0.0.255 command
Answer: C
The fault condition is related to which technology?
A. NTP
B. IP DHCP Server
C. IPv4 OSPF Routing
D. IPv4 EIGRP Routing
E. IPv4 Route Redistribution
F. IPv6 RIP Routing
G. IPv6 OSPF Routing
H. IPV4 and IPV6 Interoperability
I. IPv4 layer 3 security
Answer: G
What is the solution of the fault condition?
A. Under the BGP process,enter the bgp redistribute-internal command
B. Under the BGP process, bgp confederation identifier 65001 command
C. Delete the current BGP process and reenter all of the commands using 65002 as the AS number.
D. Under the BGP process, delete the neighbor 209.56.200.226 remote-as 65002 command enter the neighbor 209.65.200.226 remote-as 65002 command.
Answer: D
Two routers are connected through PPP connection. After the PPP was established the admin put OSPF running above it. The OSPF formed adjacency but after soon the adjacency dropped.
What is the reason? (The cause of OSPF forming an adjacency over a GRE tunnel and dropping immediately)
A. MTU does not match
B. Area 0 need to exist for OSPF to function properly
C. Gre tunnel destination is not reachable through tunnel
D. Gre tunnel ip address must be covered by network under ¡°router ospf 1¡±
E. ospf routes contains the route to tunnel destination
Answer: C
The Fault Condition is related to which technology?
A. BGP
B. NAT
C. IP NAT
D. IPv4 OSPF Routing
E. IPv4 OSPF Redistribution
F. IPv6 OSPF Routing
G. IPv4 layer 3 security
Answer: C
What is the solution of the fault condition?
A. Under the interface Serial0/0/0 configuration enter the ip nat inside command
B. Under the interface Serial0/0/1 configuration enter the ip nat outside command
C. Under the ip access-list standar nat_trafic configuration enter the permit 10.2.0.0 0.0.255.255 command
D. Under the ip access-list standar nat_trafic configuration enter the permit 209.65.200.0 0.0.0.255 command
Answer: C
What is the solution of the fault condition?
A. Under the ip access-list edge_security configuration add the permit ip 209.65.200.224 0.0.0.3 any command
B. Under the interface Serial0/0/1 enter the ip access-group edge_security out command.
C. Under the ip access-list edge_security configuration delete the deny ip 10.0.0.0 0.255.255.255 any command
D. Under the interface Serial0/0/0 configuration delete the ip access-group edge_security in command and enter the ip access group edge_security out command
Answer: A
What is the MTU¡¯s size in a GRE tunnel?
A. 1630
B. 1476
C. 1500
D. 1900
Answer: B
The fault condition is related to which technology?
A. NTP
B. IPv4 OSPF Routing
C. IPv6 OSPF Routing
D. IPV4 and IPV6 Interoperability
E. IPv4 layer 3 security
Answer: D
The Fault Condition is related to which technology?
A. BGP
B. NTP
C. IP NAT
D. IPv4 OSPF Routing
E. IPv4 OSPF Redistribution
F. IPv6 OSPF Routing
G. IPv4 layer 3 security
Answer: A
Today, I tell you a shortcut to success. It is to pass the Cisco 300-135 exam. With this certification, you can live the life of the high-level white-collar. You can become a power IT professionals, and get the respect from others. Passtcert will provide you with excellent tshoot 300-135 dumps, and allows you to achieve this dream effortlessly. Are you still hesitant? Do not hesitate, Add the Passtcert tshoot 300-135 dumps to your shopping cart quickly.
